Analog modules IT–7604 analog input module The IT-7604 analog input module has 8 differential analog inputs. Each input has a nominal current source 1 mA for supplying passive sensors (Pt100, Ni1000).... Data communication Examples of RS-485 PLC interface connection TECOMAT TC700 The examples show the basic recommended connections, which are of course not the only possible ways of connection. Connection of two TC700 systems... Frames, power supplies and cables Connection of single-frame and multi-frame assemblies TC700 (connection of RM-794x frames) All frames of one PLC assembly (ie all frames controlled by one central unit located in one of the frames) must be interconnected by bus cables, which... Processor and communication modules ETHERNET PLC TC700 interface (interfaces, cables) Central modules and communication modules (SC-710x series) are in some variants equipped with Ethernet interface, 10 Mbit, RJ-45 connector, see chap. 3.10.3.1. Each... Processor and communication modules USB interface of TC700 PLC central modules For PC connection (programming, service) the central module is always equipped with one USB interface. The USB interface allows the connection of two cooperating... Processor and communication modules MR-0152 - PROFIBUS DP interface, with galvanic isolation The MR-0152 submodule enables the connection of the TECOMAT TC700 PLC to the PROFIBUS DP network as a slave station with a transfer rate of up to 12 MBd.... Processor and communication modules MR-0151 - CAN interface, with galvanic isolation The MR-0151 submodule enables the connection of the TECOMAT TC700 PLC to the CAN network with transmission speeds of 500, 250, 125, 50, 20 or 10 kBd. It... Processor and communication modules MR-0122 - RS-422 interface, with galvanic isolation The MR-0122 submodule ensures the conversion of TTL signals of the serial interface to the galvanically separated RS422 interface. The interface allows... Processor and communication modules MR-0112 - RS-485 interface, with galvanic isolation The MR-0112 submodule ensures the conversion of TTL signals of the serial interface to the RS485 interface galvanically separated. This interface works... Processor and communication modules MR-0102 - RS-232 interface, with galvanic isolation The MR-0102 submodule converts TTL signals from the serial interface to the RS232 interface, including galvanic isolation. This interface is only intended... … 54 55 56 57 58 59 60 61 62 …