Foxtrot basic modules Connection of two Foxtrot systems using the RS-485 interface (the MR-0114 submodule) Interconnection of two Foxtrot systems using a serial channel with the RS-485 interface is shown in Fig. 1. The connection assumes two systems and thus... Foxtrot basic modules RS-485 interface (the MR-0114 submodule) of the CH2 communication interface, characteristics The RS-485 serial interface submodule (the MR-0114 type, order no. TXN 101 14) is fitted with a complete circuit of bus termination, terminated at C4 (signal... Foxtrot basic modules Examples of connection of Foxtrot communication interfaces The examples show the basic recommended connections, which are naturally not the only possible options. Foxtrot basic modules SX-1162, an Ethernet switch on a DIN rail The SX-1162 module includes a standard 5-port Ethernet switch. The ports are terminated with the RJ-45 connectors and they support the 10Base-T and... Foxtrot basic modules Connecting Foxtrot to a fibre-optic network In order to integrate Foxtrot into a fibre-optic network (singlemode 9/125 μm, multimode 62.5/125 μm), media converters should be used, such as the... Foxtrot basic modules Basic connection, the ETHERNET network implementation Fig. 1 Basic connection, implementation of the ETHERNET network basic connection PC-PLC e.g. using a notebook it is possible to use a... Foxtrot basic modules The principles of wiring the ETHERNET General principles of UTP cables installation: During the installation of cables, sharp bends should be avoided; the cable must not be broken e.g. in... Foxtrot basic modules Recommended UTP (FTP) cables for the ETHERNET Standard indoor installations, inside the control panel, etc., only require common UTP cables, which are a standard for structured networks. Both unshielded... Foxtrot basic modules Connecting straight-through and crossover UTP cables in the ETHERNET TP cables (twisted pair) are either straight-through (UTP patch cable) or crossover cables. The straight-through TP cable is the most common cable... Foxtrot basic modules ETHERNET PLC Foxtrot physical interface The Ethernet interface is fitted with a standard RJ-45 connector with a standard layout of signals. The connector is ready to use with common UTP patch... … 15 16 17 18 19 20 21 22 23 …