English
The operators panel ID-36 is designed for cooperation with TECOMAT TC700 systems and Foxtrot.
User screens are created in the Mosaic programming environment with the Webmaker tool, and are therefore identical with the sites accessible via the web server.
The panel has a backlit LCD touch screen with the resolution of 800x600 pixels. The power supply voltage of the panel is 24 VDC and it is connected either to terminals A3, A4, or the panel can be powered via the Ethernet interface cable; the 24 V supply should be connected to the unused pairs 4/5 and 7/8. In this case, the polarity is irrelevant.
Communication between the control system and the ID-3 panel takes place via the Ethernet 100Base-TX interface, or via a serial line with the RS-485 interface with the EPSNET protocol.
The ID-36 panel is designed for built-in mounting in the switchboard door, and the like.
Connecting the cables (Ethernet, 24 VDC power supply) is identical with the ID-32 panel.
Fig. 1. Mechanical dimensions and placement of the ID-36 module connectors
Notes:
-
On the rear side of the panel is the RJ-45 connector for connecting a standard patch cable and the RS-485 (TCL2) removable connector with 24 VDC power supply and a variable interface.
-
Alternatively, the panel can be powered via the Ethernet interface cable: the 24 V supply voltage should be connected to the unused pairs 4/5 and 7/8, and the polarity in this case is irrelevant.Suitable passive modules for power supply injection l (i.e. Splitter) can be obtained in computer shops (they are often referred to as PoE modules, although they don´t represent the standard Power over the Ethernet).
-
The mounting hole dimensions should be 265x207 mm.
-
The operators panels must not be exposed to direct sunlight.