RFox RF master RF-1131 The product is no longer for sale The RF master implements communication with RF peripheral modules and transmits the acquired data via the system communication... RFox System functions, configuration, characteristics The communication between the RF master and RF peripheral module is supported for star and mesh topologies. The star topology represents a direct... RFox RFox bus basic parameters The RFox bus (network) is designed to fully comply with the above-stated general authorization. The system is designed to minimize the already massive... RFox RFox bus – principles of design and installation Modules equipped with the RFox interface are no longer available The RFox bus is a wireless radio bus. It is operated in accordance with the general authorization... CIB SPD module of Type 2 DTNVEM 1/CIB and DTNVE 1/CIB If the CIB bus is installed with a risk of excess voltage influence either in the bus itself or in the connected elements (e.g. concurrence with the lightning... CIB CIB surge protection Surge protectors (SPD) for the CIB bus are available: SPD module Type 1+2+3 (the lightning surge suppressor) and Type 2+3 SPD module of Type 2 DTNVEM... CIB Decoupling power supply to CIB – the C-BS-0001M decoupling module The C-BS-0001 decoupling module provides proper power supply of one CIB. The module decouples the bus power supply source from peripheral modules and the... CIB CF-1141 external CIB master The CF-1141 master module provides the power for and operation of two CIB buses (branches), each with a maximum of 32 connected peripheral modules (units).... CIB Internal CIB master at the CP-10xx The CP-10xx Foxtrot basic modules are as a standard fitted with an internal master of CIB (except for CP-1003). Depending on the type of basic module there... CIB CIB power supply – principles, optimization The number of peripheral modules on the CIB (a branch). The maximum number of CFox peripheral modules in one CIB is 32. This number must NEVER be exceeded.... … 10 11 12 13 14 15 16 17 18 …