Connecting the ESS control panels to the Foxtrot system The installations with an ESS separate control panel (due to certification, special technical requirements, etc.) can integrate the control panel in the... Connecting an outdoor siren The outdoor siren is usually connected to a permanent power supply, which provides charging the built-in battery. In addition to its own acoustic transducer... Connecting an indoor siren Indoor sirens are usually connected with two wires; after being connected to a 12V power supply, they generate a very strong signal (over 110 dB). The... Sirens Sirens serve as an acoustic signal of alarms. The outdoor sirens, which should notify people of the alarm, and the internal sirens, which should mainly... Conection of the opening detectors There are a number of devices available for monitoring of the opening of doors, which differ primarily in their mechanical design and the purpose. Some... The opening detectors There are a number of devices available for monitoring of the opening of doors, which differ primarily in their mechanical design and the purpose. Some... Connecting the EXODUS fire detectors to the C-WG-0503S module Fire detectors from the EXODUS series, manufactured by TEXECOM, can be used for monitoring areas as a part of fire prevention. The detectors are available... Fire detectors, fire alarm systems Samples of use, connection of fire detectors. Connecting the IMPAQ Glass Break detector to the C-WG-0503S module The IMPAQ Glass Break detector can be used for the detection of breaking glass; it is manufactured by the TEXECOM. It is a digital acoustic glass break... Glass break detectors Glass break detectors - basic connection to Foxtrot system 1 2 3 4
