The KNX system integration (e.g. by using the KNX controllers) The Foxtrot systems can be linked with the KNX installations via the KNX IP BAOS 772 module. This module allows both the exchange of data between the... Communication with other systems Description of the integration of the various control systems, etc. The antennas for the SMS modem and the RFox master RF-1131 The AN-06 antenna A short antenna with a joint - its orientation can be adjusted. The antenna is terminated with an SMA connector and it can be used for... SMS communication, connecting the INSYS GSM small modem to the Foxtrot basic module The following example illustrates the wiring of the INSYS GSM small modem to the CH1 interface of the Foxtrot basic module. Fig. 1. An example of connecting... SMS communication, connecting the UC-1205 modem to the Foxtrot basic module The SMS modem UC-1205 is placed in a 1M box (the size of a single-phase circuit breaker), so it can be fitted next to the basic module in a common plastic... SMS communication The SSM modems connected to the communication interface of the Foxtrot basic module will provide communication between the Foxtrot system and the user,... Linking the Bang&Olufsen AV system with the Foxtrot system There is support available for linking the Bang & Olufsen AV system with the Foxtrot system. The linking is implemented via the RS232 serial line with... The connection of the AV Control4 system with the Foxtrot system. Original solution (no longer used). There is an integration module Control4 available to expand the Foxtrot system to enable it to distribute music and... Integration of multimedia systems Different variants of mutual integration of Foxtrot systems and multimedia systems. An IR transmitter and receiver to be mounted on the wall: the C-RI-0401R-design The C-RI-0401R-design module contains a receiver and a transmitter of IR signal. They are intended for scanning and generating signals from the controllers... 1 2 3 4 5
English
