Technical information about Foxtrot basic modules (parameters on terminals, relay output parameters, etc.) Connecting straight-through and crossover UTP cables in the ETHERNET TP cables (twisted pair) are either straight-through (UTP patch cable) or crossover cables. The straight-through TP cable is the most common cable... ETHERNET PLC Foxtrot physical interface The Ethernet interface is fitted with a standard RJ-45 connector with a standard layout of signals. The connector is ready to use with common UTP patch... Ethernet interface on the PLC Foxtrot (interface, cables) As a standard, the basic module is fitted with the Ethernet interface, 10/100 Mbit, RJ-45 connector, see Chapter .1. Each physical Ethernet interface... MR-0158 – M-Bus slave interface, with galvanic isolation Module is no longer for sale. More details concerning the M-Bus interface, including examples of the MR-0158 submodule connection, can be found in... MR-0152 - PROFIBUS DP interface, with galvanic isolation The MR-0152 submodule allows the connection of PLC TECOMAT Foxtrot to the PROFIBUS DP network as a slave station (subordinate) at the data transfer rate... MR-0161 - CAN interface, with galvanic isolation The MR-0161 submodule allows the connection of PLC TECOMAT Foxtrot to CAN network with data transfer rates of 500, 250, 125, 50, 20 or 10 kBd. It can only... MR-0160 - 2x CAN interface, with galvanic isolation The MR-0160 submodule allows the connection of PLC TECOMAT Foxtrot to two CAN networks with data transfer rates of 500, 250, 125, 50, 20 or 10kBd. It can... MR-0124 - RS-422 interface, with galvanic isolation The MR-0124 submodule provides the conversion of the serial interface TTL signals to the galvanically isolated RS-422 interface. The interface allows a... MR-0114 - RS-485 interface, with galvanic isolation The MR-0114 submodule provides the conversion of the serial interface TTL signals to the galvanically isolated RS-485 interface. This interface operates... MR-0104 - the RS-232 interface, with galvanic isolation The MR-0104 submodule provides the conversion of TTL signals from serial interface to the RS-232 interface, including galvanic isolation. This interface... 1 2 3 4 5 6 7
