Connecting multiple CF-2141s to a single CP-2005 The following example shows the data connection of several CF-2141 master modules to one Foxtrot 2 basic module using the SX-1161 Ethernet switch. The... BDM-024-V/1-FR1-CIB. SPD module Type 1+2+3 (lightning current arrester) BDM-024-V/1-FR1-CIB Lightning current arrester with two-stage switch protection of personal data for the bus CIB. installation at the entrance... SPD module of Type 2 DTNVEM 1/CIB and DTNVE 1/CIB If the CIB bus is installed with a risk of excess voltage influence either in the bus itself or in the connected elements (e.g. concurrence with the lightning... CIB surge protection Surge protectors (SPD) for the CIB bus are available: SPD module Type 1+2+3 (the lightning surge suppressor) and Type 2+3 SPD module of Type 2 DTNVEM... Decoupling power supply to CIB – the C-BS-0001M decoupling module The C-BS-0001 decoupling module provides proper power supply of one CIB. The module decouples the bus power supply source from peripheral modules and the... CF-1141 external CIB master The CF-1141 master module provides the power for and operation of two CIB buses (branches), each with a maximum of 32 connected peripheral modules (units).... Internal CIB master at the CP-10xx The CP-10xx Foxtrot basic modules are as a standard fitted with an internal master of CIB (except for CP-1003). Depending on the type of basic module there... CIB power supply – principles, optimization The number of peripheral modules on the CIB (a branch). The maximum number of CFox peripheral modules in one CIB is 32. This number must NEVER be exceeded.... CIB characteristics The CIB is a two-wire bus with free topology. The communication itself is modulated on DC supply voltage. Powering the bus is provided by a standard 27.2... CIB bus – principles of design and installation The CIB is a bus developed by Teco a. s., which also owns the rights to the trademark "CIB Common Installation Bus". The CIB is intended primarily...
English
