C-DM-0002S-SL

The C-DM-0002S-SL module is intended for the control of addressable RGB LEDs (type WS2812B and compatible), which can be used either directly in the form of a classic strip or various sets of these LEDs (mechanical arrangement in a matrix, circle, etc.).
In total, one module can control up to 500 LEDs connected in one row. The LED strip can be powered either from an external source or directly from the 5 V output of the module (maximum current 1 A). The following figure shows the C-DM-0002S-SL module. The module has a miniature terminal block for connecting the CIB bus and a tip (classic tips with a spacing of 2.54 mm) for connecting a board with LEDs or LED strip equipped with addressable RGB chips.

Fig. 1 Terminals and connections of the C-DM-0002S-SL module

Fig. 1 Example of installation of module C-DM-0002S-SL on customer PCB with RGB chips with LED layout according to customer's request

Each RGB chip can be controlled separately, the color and intensity can be set with one value 0 ÷ 55 according to the following table:

See this article for more information on using the module.

Tab. 1  Basic parameters of C-DM-0002S-SL