HELVAR ballast control by C-IR-0203S module To control the HELVAR electronic ballasts (and similar types of other manufacturers) designed to dim fluorescent lamps controllable by analog voltage... Dimming – fluorescent lamps with a 0 ÷ 10 V ballast Dimmable electronic ballasts for fluorescent lamps often use the analog signal 0 to 10 V, or 1 ÷ 10 V to controlling dimming. Any analogue... Switching power supply to the DSI, DALI, etc. ballasts Electronic ballasts, whether they are controlled by a 0 to 10 V signal or by a DALI or DSI interface, have very often a significant capacitive load, and... The DSI ballasts control, module C-DL-0064M The C-DL-0064M module can be set in the mode of the protocol converter CIB – DSI. It is designed to connect lighting devices with DSI protocol of... DALI ballast control, module C-DL-0064M The C-DL-0064M module is a protocol converter CIB – DALI. It is intended for the connection of lighting devices with the DALI protocol according... Controlling DALI ballasts, the C-DL-0012M module To control lighting devices with DALI protocol (typically ballasts for fluorescent lights, etc.) there is the CIB - DALI protocol converter, the C-DL-0012S... Dimming – DALI and DSI interface The DALI protocol is designed for connecting lighting devices in accordance with the specification NEMA Standards Publication 243-2004 Digital Addressable... Tested CFL and LED bulbs, the measured parameters To verify their proper functionality, we have tested (and still are testing) various CFL and LED bulbs. The wiring of the tested sources is identical with... Dimming compact fluorescent lamps (CFL) and LED bulbs Compact fluorescent lamps (further CFL) and LED bulbs (further LED), which are designed by the manufacturer for dimming, so they have the word "Dimmable"... Dimming of LED ceiling panels with a current of 1 A, module C-DM-0006M-ILED Some light sources, equipped with a simple 230 V source (driver) are equipped with LED diodes in a connection suitable for direct dimming - ie instead... 1 2 3 4
English
