English
The interior temperature can be measured with the S-TS-01R stand-alone temperature sensor (e.g. the NTC 12k) designed according to the customer's requirements. The sensor is available in ABB Time design under the order number TXN 134 01.01 (basic white). Other generally available design options (e.g. ABB, Legrand, Unica) are included in the price list, versions for other designs are custom-made. The sensor is equipped with an NTC 12k element terminated on the rear side (the direction inside the installation box).
We can also deliver a custom-made sensor equipped with the Pt1000 sensor (on request, with a different order designation).
We can supply temperature sensors for other designs as well, but check with us the availability of a specific type of design.
The sensor can be connected to any analogue input with an appropriate measurement range (NTC 12k). E.g. it can be connected to the C-WS-0x00R controller as an indoor temperature sensor (and put into a twin frame together with the controller) - see the figure below.
The temperature sensor can also be connected to any input of the system with an appropriate range, e.g. the AI1 to AI4 inputs of the C-IB-1800M module, the AI1 to AI3 inputs of the modules C-HM-0308M, C (R) -HM-1113M and C (R) -HM-1121M.
Fig. 1. An example of connecting the S-TS-01R sensor to the C-WS-0200R-Time module
Notes:
-
The length of the connecting cable to the S-TS-01R sensor can be up to dozens of meters; the cable used can be e.g. the SYKFY or similar, with at least 1x2 shielded wires with 0.5 mm diameter.
-
The sensor is designed as a dummy plate (the ABB design in this case), the terminal block is located on the rear part of the module, which is screwed on the flush box (KU68), the depth of the sensor is approx. 13 mm.