English
Peripheral module terminals are standard cage fixed terminals with a pitch of 5.08 or 7.62 mm. A flat (3.5 mm wide) screwdriver is intended for handling the terminal. More detailed terminal parameters are given in the following table.
Tab. 1 Terminal block parameters of 24 A modules on DIN rail
| Clamp spacing | 5,08 or 7,62 | |
|
Clamptype |
Screw cage | |
 |
||
| Wire stripping length | mm | 7 |
| Clamp tightening torque | 0,5 Nm | |
| Wire dimensions | ||
| Clamping range | mm2 | 0,5 ÷ 4 |
| Rated voltage | V | 750 |
| Rated current | A | 24 |
|
Material |
||
| Plastic of the connector |
PA68 UL94VO |
|
| Contact |
CuZn37+Ni+Sn |
|
| Cage |
CuZn40 Pb2+Ni |
|
| Screw |
M3-C8R+Zn |
|