English
TC700 frames are designed for screwing to the rear panel of the cabinet. Oval holes for a screw of max. M6 are prepared in the corners of the frame.
Fig. 1 shows the basic mechanical dimensions of the RM-7941 frame (8 positions). The RM-7942 frame (15 positions) differs only in length, which is also shown in the picture. The total depth of the system (including modules) is 138 mm.
Fig. 1 Frame dimensions RM-7941 (total depth including modules is 138 mm)
Bus extension connectors (BE1 and BE2) are located on the left side of the frame. The connectors are identical and any connector can be used to connect the frames for multi-frame assemblies (see article for details).
Below the connectors is a frame address setting switch. Details of frame addressing and determining the address of the modules in the frame are given in the TXV 004 02 documentation.
Fig. 2 shows the basic mechanical dimensions of the frame RM-7946 (4 positions) and the frame RM-7944 (2 positions). The total depth of the system (including modules) is 138 mm.
The RM-7946 and RM-7944 frames can also be mounted on a 35 mm DIN rail. For mounting on a DIN rail, it is necessary to screw the supplied brackets to the back of the frame.
Fig. 2 Dimensions of frames RM-7946 and RM-7944 (total depth including modules is 138 mm)