English
The C-RF-0001M-A module ensures the communication of RFox2 wireless peripherals with the basic Foxtrot module using the CIB bus. I.e. it is a master bus (radio network) RFox2, which is connected via the CIB bus. It allows to connect a limited (approx. Units of RFox2 modules) the number of RFox2 peripheral modules. E.g. If necessary, add a wireless outdoor temperature measurement to the normal Foxtrot installation.
The module is in a 1.5M mechanism on a DIN rail, it is powered from the CIB bus.
The RFox2 master is connected to a standard SMA connector on the front of the module and standard 868 MHz antennas are used.
Basic parameters
|
Connection |
Screw terminals, tightening torque max. 0,5 Nm max. 2,5 mm2 |
|
Communication interface |
CIB (slave), RFox2 (master) |
|
Type of device |
DIN rail module |
|
protection - ČSN EN 60529:1993 (idt IEC 529:1989) |
IPxxB |
|
Weight |
79 g |
|
Dimensions |
1,5M = 22,7x95x58 mm |
|
Operating temperature range |
-20 °C .. +70 °C |
|
Permissible temperature during transport |
–25 °C .. +85 °C |
|
Relative air humidity |
10 % .. 95 % without condensation |
|
Atmospheric pressure |
min. 70 kPa (< 3000 m.n.m., over sea level) |
Electrical parameters
|
Power voltage |
24 / 27,2 V DC (from CIB) |
| Internal security |
Yes - returnable |
|
Maximum consumption |
20 mA |
RF interface parameters of the module
are listed in the article Basic parameters of RFox2 modules
Fig. 1 basic example of connecting the C-RF-0001M-A module to the basic Foxtrot module