CIB modules 27.03.2020 07:44 27.03.2020 07:44

The C-DM-0002S-SL module is intended for the control of addressable RGB LEDs (type WS2812B and compatible), which can be used either directly in the form of a classic strip or various sets of these LEDs (mechanical arrangement in a matrix, circle, etc.).
In total, one module can control up to 500 LEDs connected in one row. The LED strip can be powered either from an external source or directly from the 5 V output of the module (maximum current 1 A). The following figure shows the C-DM-0002S-SL module. The module has a miniature terminal block for connecting the CIB bus and a tip (classic tips with a spacing of 2.54 mm) for connecting a board with LEDs or LED strip equipped with addressable RGB chips.

 

Fig. 1 Terminals and connections of the C-DM-0002S-SL module

Fig. 1 Example of installation of module C-DM-0002S-SL on customer PCB with RGB chips with LED layout according to customer's request

 

 

Each RGB chip can be controlled separately, the color and intensity can be set with one value 0 ÷ 55 according to the following table:

 

See this article for more information on using the module.

 

Tab. 1  Basic parameters of C-DM-0002S-SL

LED power supply (5V output)

Number 1
Output voltage 5 VDC ± 10%
Output current max. 1 A

Power and communication

Power and communication 24 V (27 V) from the CIB bus
Maximum consumption 15 mA

Operating and installation conditions

Operating temperature -10 ÷ +55 °C
Storage temperature -25 ÷ +70 °C
Degree of IP protection IEC 529 unprotected
Working position any
Type of operation permanent
Connection spring terminal block,

 

conductor max. 0,5 mm2