English
The IS-7510 module is designed for scanning of up to 32 binary signals 24 VDC with minus common pole, type 3 (primarily for the connections of external modules to the DIN bar of series IB-04xx) and for the control of up to 32 loads 24 VDC / 0.05 A (primarily for the connections of external modules to the DIN bar of series OS-04xx or OR-04xx).
The outputs are realized by solid-state switches. The module has intelligent input and output circuits, which require connecting 24 VDC external supply voltage. The module is fitted with four identical connectors. Further information on the interconnection with external modules can be found in chapter 11.3. The outputs close against the COM common pole (common pole minus!!).
Figure 6.4.6.1 IS-7510 module connector
-
Individual outputs can be loaded by a continuous current of up to 0.05 A.
-
The short-time current through the output (switching effects) can be up to 0.1 A.
UDIx Input of supply voltage +24 VDC for internal circuits of the module
COMx Common pole of input circuits and power supply of input circuits
DIx input terminal of input x
UDOx Terminal for feeding of internal module circuits (+ 24 VDC)
COMx Common pole of output circuits and internal circuits of the module
DOx Output terminals of output