English
The module is intended for connecting the RFID reader SL031 (13.56MHz) with an integrated antenna for reading Mifare 1k, Mifare 4k, Mifare UltraLight and NFC NTAG203 tags. In addition to the signals for connecting the reader, the module contains 2 universal DI/AI inputs and 5 DO/PWM outputs.
The module enables powering, for example, of the indicator LEDs of the charging socket, it is equipped with a 22 VDC output with a maximum load of 60 mA (terminal A3).
The module is equipped with binary outputs DO1 to DO4, which allow switching circuits powered by a voltage of 9 ÷ 30 VDC (the supply voltage is connected to the VDO+ terminal (terminal B1) with a maximum switching current of 200 mA at 25 °C or 160 mA at ambient temperature 55°C (current always applies to all outputs together - max. total current of added outputs, also applies to each output separately).
The SL031 RFID reader (StrongLink) can be connected to the module, which at the same time supplies power, see example in Fig. 2. The SL031 reader is a separate PCB with spacers 38 x 38 x 3 mm, which can be installed under the cover of the final product (wallbox, interior controller on the wall, etc.).
The module is equipped with a separate, galvanically isolated output DO5 (terminals DO5 and COM2), intended for example for controlling the electromagnetic door opener. The output can switch voltage up to 48 VDC, the maximum switching current is 150 mA at an ambient temperature of 25°C, at an ambient temperature of 55°C the maximum switching current is 80 mA. The output is only a switching element, assuming an external power supply of the switched circuit.
The module is fitted with terminal blocks A, B and C on both sides, see Fig. 1.
Fig. 1 Module C-WG-0205S, terminal block
Fig. 2 Example of connecting the SL031 reader and the EV-T2SOC-P charging socket LED indicator to the C-WG-0205S module
Fig. 3 charging socket terminal block EV-T2SOC-P
Table of basic parameters of the module and user manual: catalog.tecomat.cz/produkt/modul-c-wg-0205s