Connectors with screw terminals, 5.08mm spacing, modules on a DIN rail

The connectors of modules on a DIN rail are standard removable connectors with a cage terminal in the removable part, with the spacing of 5.08mm.

A flat-head screwdriver with the tip width of 3.5 mm is recommended for manipulation with the terminal. For more detailed parameters of terminals, see the following table:

Tab. 1. The parameters of connector terminals of modules on a DIN rail

Spacing of terminals		5.08
The type of terminal		Screw cage
Wire stripping length	mm	7
Tightening torque for the terminal screws		0.5 Nm
Conductor sizes
Clamping range	mm2	0.1 ÷ 2.5
	AWG	26 ÷ 12
Nominal voltage	V	450
Nominal current	A	10
Material
Plastic material of the connector	Polyamide PA6.8, UL94-V0, CTI600V, GWT960 °C
Contact	Nickel-plated phosphor-bronze
Cage	Nickel-plated brass
Screw	M3 - galvanized steel