CIB modules 15.03.2020 16:32 15.03.2020 16:32

The C-IT-0200R-Design module is a temperature sensor in selected interior designs, which can be directly connected to the CIB bus. The module is designed for assembly on the wall in the flush box

 

Construction of the module C-IT-0200R-design consists of two parts. The design part contains a temperature sensor and features a selected interior design. The second part is an embedded module, which is located in the flush box and enables the connection to the CIB bus.

 

The module contains two analogue measurement inputs.

The first is permanently connected to the internal temperature sensor, which is a part of the design.

The second input is terminated by wires on the embedded module and a stand-alone external sensor can be connected to it, such as the NTC 12k or an NTC within the range of the measured resistance up to 100 kΩ.

 

Basic parameters of the IN input of the C-IT-0200R-design module:

 

The range (the sensor type)

Resolution

The measurement error

The measurement range

NTC 12k

0.1 °C

0.5 °C

0 ÷ +90 °C

The resistance sensor

0.1 kΩ

0.5 kΩ

0 ÷ 25 kΩ

0.2 kΩ

0.5 kΩ

25 ÷ 50 kΩ

0.5 kΩ

1 kΩ

50 ÷ 100 kΩ

 


Fig. 1. The signal layout of the C-IT-0200R-design module, the wire colour coding and the basic connection
(the old version before November 2012)

 

Fig. 2. The signal layout of the C-IT-0200R-design module, the wire colour coding and the basic connection
(the new version after November 2012)

 

Notes:

  1.  

    The terminals of the module are insulated conductors with a cross-section of 0.14 mm2, a length of approx. 10 cm, terminated with crimped sockets H0.25 / 10.

 

 

 


 

Fig. 3. Internal wiring of the C-IT-0200R-design module.