English
The temperature of liquid flowing in the piping is measured by a temperature sensor with a stem in a stainless steel sleeve fitted in the piping; there is available the CFox module C-IT-0100H-P, the Order No. is TXN 133 16.0x (x - the stem length), and it is necessary to additionally order the appropriate immersion sleeve TXP 300 1x (x - the sleeve length). The module is placed in a plastic head with a terminal block for the connection of the CIB bus; the metal measuring stem is made of stainless steel, grade DIN 1.4301, the stainless steel sleeve is equipped with a G1/2" screw thread. The standard version of the module is designed for a maximum temperature of 150 ºC. The modules are used in a standard environment, where they are not exposed to aggressive chemicals.
The wiring example is identical with that of the C-IT-0100H-P outdoor sensor.
|
Measurement range |
-30 ÷ +150 ºC |
|
Accuracy class |
B in accordance with IEC 751 |
|
Isolation resistance |
> 100 MΩ at 25 ºC (500 VDC) |
|
Level of protection |
IP 65 (ČSN EN 60529) |
|
Relative humidity |
< 95 % |
|
Ambient temperature |
-25 ÷ +80 ºC |
|
Stem |
stainless, DIN 1.4301, |
|
Head |
made of polycarbonate, grey dimensions: 74 x 66 x 39mm |
|
Gland |
PG9, the cable diameter 4 ÷ 8 mm |
|
Terminal block |
maximum 1 mm2 wires on the terminal |
|
L2 (mm) |
Order number |
Order number |
|
|
The C-IT-0100H-P module |
The immersion sleeve |
|
100 |
TXN 133 16.01 |
TXP 300 11 |
|
160 |
TXN 133 16.02 |
TXP 300 12 |
|
220 |
TXN 133 16.03 |
TXP 300 13 |
|
280 |
TXN 133 16.04 |
TXP 300 14 |
|
340 |
TXN 133 16.05 |
TXP 300 15 |
Immersion sleeve, basic parameters:
|
Lengths: L2 (mm) |
100,160,220,280,340 |
|
Screw thread |
G½ and M20x1.5 |
|
Material |
DIN 1.4301 |
|
Maximum pressure |
4 MPa |
Dimensions of the immersion sleeve a welding flange for the sleeve