Controllers on the CIB bus, the Logus design

You can control the lighting, blinds, ventilation and similar applications using the control unit C-WS-0200R-Logus with one fingerboard (2 buttons - one at the top and one below), or the C-WS-0400R-Logus with two fingerboards (4 buttons - each fingerboard has a button at the top and below). Both types of drivers are equipped with an internal temperature sensor, and up to two external temperature sensors can be connected to them (a room temperature sensor - the Pt1000 sensor itself in an adjacent frame of Logus design, the S-TS-01R, and the second sensor e.g. for measuring the floor temperature).

The module is fitted with LED indicators. For each flap there is available a red and green LED; their control can be custom-made to suit the customer's requirements.

Fig. 1. An example of connecting the C-WS-0200R-Logus and the C-WS-0400R-Logus controllers

Notes:

1. The temperature sensors may be the Pt1000, NI1000, NTC 12k or other NTC with the resistance of up to 100 k, the length of the connection cable can reach dozens of meters - a typical application is for a floor sensor; the recommended cables include e.g. the SYKFY or similar, with at least 1x2 0.5 mm wires.

2. The module is designed as a standard installation element to be mounted on the flush box (KU68).

3. Connecting wires: Insulated wires with the cross-section of 0.75 mm² with pressed-on sleeving approx. 100 mm long.