Wall push-buttons scanned by the input module C-IT-0200S

If you wish to scan the controllers (push-buttons) in other designs, you can select from the standard range of selected manufacturers push-buttons without adjustment and mount them onto the CIB module with digital inputs.

It is advantageous to use the C-IT-0200S module for controllers with one or two push-buttons, as it can be placed directly into the flush box under the controller.

Fig. 1. An example of connecting two push-buttons scanned by the C-IT-0200S module

Notes:

1. All the module outlets (the CIB and the inputs) are terminated in an insulated wire approx. 100 mm long, terminated in a sleeve; they should be installed directly in the terminals of the wall push-button controller.