Controllers on the CIB bus, the iGlass design

To control the lighting, blinds, ventilation and similar applications, the controller C-WS-0x00R-iGlass can be utilized. It is available in several versions according to the number of keys (1-6 buttons, a circular controller, a display) and the mechanical design (the size of the glass cover is 80 x 80 mm or 80 x 120 mm). The controllers are equipped with capacitive buttons and a glass face. Up to two external temperature sensors can be connected to the controllers (e.g. a room temperature sensor - the Pt1000 sensor itself in an adjacent frame, and another sensor e.g. for measuring the floor temperature).

The C-WS-0x00R-iGlass module is equipped with a LED backlight and it can respond to an approaching hand. For detailed technical information, and overview of available variants of controllers,dimensions and other data, see Chapter 14.

Fig. 1. An example of connecting the C-WS-0x00R-iGlass controllers

Notes:

1. The temperature sensors may be the Pt1000, NI1000, NTC 12k or other NTC with the resistance of up to 100 k, the length of the connection cable can reach dozens of meters - a typical application is for a floor sensor; the recommended cables include e.g. the SYKFY or similar, with at least 1x2 0.5 mm wires.

2. The module is designed as a standard installation element to be mounted on the flush box (KU68).

3. The CIB bus and both universal inputs DI/AI1 and DI/AI2 are terminated on the terminal block in the rear part of the module.