The push-buttons scanned by the C-IB-1113M module in the control panel

If you wish to scan the controllers (push-buttons) in other designs, you can select from the standard range of selected manufacturers push-buttons without adjustment and mount them onto the CIB module with digital inputs.

Installations with assumed placement of the control system modules in the control panel can also use the C-HM-1113M and the C-HM-1121M modules. They should be placed in the main control panel (together with the basic module) or in subordinate distribution boards (in order to optimize the number of cables in the house).

Fig. 1. An example of connecting the push-buttons scanned by the C-HM-1113M module.

Notes:

1. The cable for push-button controllers, e.g. SYKFY, JY (St) Y, etc., with the length of up to approx. 30 m.

2. If there are several controllers in one place, you can use for all of them a common multicore cable. The temperature sensor connection can also lead in a common cable (e.g. if there is a multiple frame on the wall with a push-button control and a temperature sensor, all these signals can lead via a common cable to the control panel); in this case, a shielded cable should always be used.

3. If the cables are long or run in parallel with LV distribution, shielded cables are recommended, as they reduce the risk of false switching due to interference.