Dimming RGB, monochrome and two-colour LED strips

Lighting, socket circuits 18.02.2020 20:29 18.02.2020 20:29

For continuous brightness control of LED strips with 12 V or 24 VDC nominal voltage there is the C-DM-0006M-ULED module.Maximum current in one output is 4 A, maximum current in the common powering terminal (terminals A6, A7) is 24 A.


Fig. 1. An example of wiring the C-DM-0006M-ULED dimmer, dimming LED strips

 

Notes:

  1. Maximum current in each output (from LED1 up to LED6) is 4 A.

  2. The current in each output terminal (LED+: terminals B1, B5, B9)) is 16 A - that means that all LED strips can´t be connected to one common terminal (e.g. B1).

  3. Each module must be powered from an independent 12 V or max. 24 V/24 A power supply.

  4. The negative CIB terminal is galvanically connected with the negative terminal of the source for LED (A7).

  5. The C-DM-0006M-ULED module is not fitted with short-circuit protection of outputs!